all american honing services honing services
  > Honing Specifications
   and Equipment
  > Developmental Services
 
  > Used Equipment and
   Tooling for Sale
  All-American Hone

Phone: 864-388-0313
Fax: 864-388-0318

135 Meadowview Lane
Greenwood, S.C. 29646
 


HONING SPECIFICATIONS AND EQUIPMENT . . .

I.D. HONING:

Inside Diameters Range From: - .090" through 4.000"
Maximum Length: - varies with diameter
Standard Tolerances: - can be held from .0001" to .005"
Controlled Surface Finish: - from 2 micro to 30 micro  (according to type of material)
EQUIPMENT AVAILABLE:

1 Vertical Sunnen Honing Machine CV616
1 Horizontal Sunnen Honing Machine MBB1660
1 Horizontal Automatic Strocker Sunnen Honing Machine MBB1800

GAGES AVAILABLE:

3 Sunnen Precision Hole Gage PG-800-S
  Diameter range from .370" through 1.500"  
1 Extension finger set for PF-800-S Gage PG-250-E
  Diameter range from 1.500" through 2.900"  
2 Sunnen Precision Small Bore Gage PG-700-E
  Gage fingers ranging from .090" through .330"  
1 Dial Bore Gage GR-6000
  Diameter range from 0.740" through 1.190"  
1 Dial Bore Gage GR-900
  Diameter range from 1.180" through 2.000"  
2 Dial Bore Gage GR-2000
  Diameter range from 2.000" through 6.125"  
1 Set-Master PG-400-E
  Range from 0" through 2.500"  
1 Dial Bore Set-Master CF-502-M
  range from .054" through 2.000"  
1 Dial Bore Set-Master CF-1136
  range from 2" through 6"  
   
Certificate of Calibration provided by: Sunnen Products Company on all Set-Masters
Calibrated using the applicable N.I.S.T. traceable equipment listed on certificates on premises and they have been found to be in accordance with INTERNATIONAL STANDARD I.S.O. 100012-1